The Pelleteer, wood pellet firebasket for wood stoves. wood pellets, wood stove insert, fire basket, green energy, biofuel, biomass, renewable energy, firebasket, fire grate, pellet basket, wood pellet basket

Made in the

USA

	Avoid over-filling the basket. With pellets, a little goes a long way. Start out by filling the basket half way or so, until you find the optimal draft settings on your wood stove for burning wood pellets. Give stove ample draft on initial lighting. Pellets require sufficient draft for combustion to be complete. Give your stove plenty of draft at the start, this will spread flames fast and bring your stove up to temperature quickly. Don't cut back on the draft until flames have covered entire top pellet surface. Watch for excessive smoke and adjust draft as necessary. Give stove ample draft after refueling. Leave plenty of embers to re-light pellet fuel when refueling. It is normal for the pellets to smoke as they reach the point of combustion with embers. In cases where not enough embers are left to re-light, simply add starter block to top of pellet surface. Fatwood is also good for this purpose. Leave draft open until flames cover pellet surface. Cut back on draft gradually to prolong burn time and adjust draft if pellets should start to smoke excessively. Maintain your stove in good working order. Replace any gaskets that may need replacing and start with a clean burn chamber and flue system. The Pelleteer will help you keep it that way.

Note: You do not need a PayPal account to purchase.